BETAEARTHBOUNDSUBORBITAL FLIGHT LAB
SIMPLIFIED EARTH

Preparing your flight deck…

YOUR PLANET. YOUR FLIGHT.

Where will you
touch down?

A free browser rocket simulator. Pick two points on Earth. Fly the space between.

Search a place or address

Search sends your query to Google and requires configured Google scenery. Queries and selected addresses are not saved by the game.

Google Maps search · Google privacy

LAUNCH
LANDING
Latitude and longitude
Platform elevations and scenery

Contact uses independent fictional platforms. Elevations are metres above the WGS84 ellipsoid, not terrain measurements. Detailed scenery is experimental; verify platform alignment before flying.

Optional estimate: NASA/METI ASTER terrain via Open Topo Data, converted using NGA EGM96. Adds 20 m clearance; inspect and adjust before flight. Dataset gaps and height errors are possible.

Optional scenery needs an owner-configured data service. It stays off by default.

Graphics and performance

Auto starts at Balanced quality. Flight physics stays the same at every graphics setting.

Flight height

Easy uses a route-dependent minimum peak for a continuous boost, coast and landing burn. The peak is a guidance target, not a hard ceiling.

Public beta for entertainment. Fictional rocket and simplified physics; not for real-world flight or navigation. Nearby imagery is historical. Features and scores may change.

Privacy · Use and data sources

FLIGHT SCHOOL

You have the controls.

EARLY BUILD 0.31

Choose a launch landmark to fly a scenic route. Paris approaches the Arc de Triomphe, Kennedy lands beside the Vehicle Assembly Building, and the mountain presets pass illustrated landmarks between textured ridges. Each of the six presets includes bundled historical ground imagery.

Easy is selected by default. Choose your sites and press Launch guided flight. The guide handles steering and power. Press Take control to fly manually, then Resume guidance to land from your current flight. Resuming after liftoff never restarts the original climb; existing upward momentum coasts with the engine off first. If the target is beyond safe reach, LAND NEARBY means a nearby touchdown is being attempted, with the original target distance still used for scoring. Assisted and Insane use manual engine and throttle controls.

W / S
Raise / lower throttle
E
Engine on / off
Arrow keys
Pitch and yaw
Hold B / centre RCS
Easy manual: brake sideways drift below 1.5 km. Uses fuel; it does not move you to the pad or control vertical speed.
Q / R
Roll in Insane mode
L
Toggle upright assist (Assisted mode)
Space
Pause / resume
Camera and attitude reference

Toward landing site is the default view. Landing pad automatically widens to include both the pad and rocket. The default view keeps the rocket close and adds a small overhead landing navigator. In Landing pad view, drag to orbit and zoom within the space needed to fit both anchors. The default view settles behind the rocket with a steady heading near touchdown; its navigator keeps the selected pad visible. Chase also starts behind the rocket with consistent control directions. Drag the 3D view to adjust it manually; click Chase again to reset the view. Use + / −, the mouse wheel, or a two-finger pinch to zoom. The Launch tilt display beside the rocket (with a header fallback on tight screens) uses your starting forward and right directions. B/F means backward/forward; L/R means left/right. White marks local upright and level ground; mint shows the rocket’s nose. During manual Easy descent, dashed orange lines show the recommended tilt. Match the mint nose lines to them; the aim turns green within 3°. Its angles do not change when you move the camera. Total tilt is measured from local upright; each view becomes edge-on when the nose points straight into that viewing plane.

Graphics during flight

Graphics can be changed while the flight is paused.

Navigation

The orange arrow shows the direction of horizontal travel toward the landing site in the current camera view. It is not an arrow-key command: controls still follow the rocket. The large circle marks the site when visible; an edge arrow guides you toward a site outside the clear view or beyond the horizon. OVER SITE means within 100 m horizontally; you must still descend safely.

Globe follows the rocket at your chosen distance. Recenter site looks along the actual 3D line from rocket to landing site while retaining a close view. Dragging temporarily adjusts the angle. After you stop, this view smoothly returns to aiming at the landing site. On final approach it settles into the launch-relative rear perspective. Passing the pad does not reverse the viewing direction: the camera follows the rocket with the launch-relative heading. Recenter site restores aiming immediately. A distant site may still be outside the view or beyond the Earth’s horizon. The orange marker stays as an edge cue and moves aside when it would cover the rocket; the compact direction card remains available even with HUD collapsed. Use wheel, pinch or + / − to zoom. Path starts ON. Its orange dashed line is an engine-off estimate refreshed about every two seconds; future thrust or steering changes the real route. Use the Path switch beside View to hide or show it.

Altitude is clearance above the simplified contact surface, not measured terrain. Target-platform clearance and WGS84 height are in Current flight details. The Giza preset uses two clear plateau pads near the three main pyramids. Kennedy includes an illustrative service tower and NASA’s Vehicle Assembly Building to the southwest. These landmarks provide visual references on the simplified globe. The scene uses local morning light at launch. The fictional N/E approach cross spans 500 m; the landing approach ring has a 500 m radius. New globe/preset decks default to 8 m above the simplified zero-height surface on a thin raised deck with visible supports; inspect and set independent heights for real terrain. These visual markings do not expand the physical platform or represent measured terrain.

Easy guided flight

Easy supports nearby routes up to 20 km and landing practice, with platform elevations at or above 0 m on the simplified contact surface. Choose a planned peak in Mission plan, or use the suggested value based on distance. It is measured above the higher platform and is a guidance target, not a hard ceiling. Easy shows a minimum peak for each route; lower requested peaks are raised to that value so the guide can fly a continuous arc instead of cruising over the target. Each flight begins with a 3–2–1 countdown so the scene has a short loading buffer. Pause freezes the countdown. Guided launch and landing practice then start the guide; manual modes wait for your engine and throttle controls. The guide manages tilted boost, engine-off coast and a later, initially full-power descending landing burn that tapers toward touchdown with ordinary steering, thrust and fuel limits. Practice descends with the engine off before a later stopping-distance-based landing burn. The compact bottom card shows the current stage and automatic throttle; elapsed time and approximate time remaining are beside the view selector. Manual panels are hidden until you take control or override power. Estimates assume continued guidance and update about every 30 seconds. Held arrows override steering; releasing them rejoins the guide. Changing throttle or engine switches guided power OFF; turn it ON to resume. Manual overrides can still cause a crash. The optional blue route is an approximate preview, hidden by default; it is not an arrow-key instruction. Cinematic slowly moves around the rocket and hides manual controls in Easy mode. Drag to adjust it, or choose Cinematic again to resume the automatic view. All views support wheel, pinch and + / − zoom. Scores remain separate from Assisted and Insane and from earlier Easy guidance versions. In Easy, a rough landing up to 20 m/s vertical speed, 12 m/s ground speed and 40° tilt can survive with lower touchdown quality. Larger impacts still crash. Assisted and Insane retain the 5 m/s, 3 m/s and 12° limits.

Scores combine accuracy (50%), touchdown quality (35%) and fuel remaining (15%). Speed and tilt reduce touchdown quality gradually. Accuracy and fuel points count for every survived landing. Local best comparisons start fresh for this scoring revision.

Manual Easy landing help

After Take control, the burn strip shows preparation, ignition and throttle guidance. During the coast, set throttle to 100% with the engine OFF so it is ready. Ignite when prompted. HOLD 100% means the numerical stopping forecast still needs full braking. TAPER TO shows an approximate lower setting once there is enough room; adjust smoothly and watch vertical speed. The percentage updates as fuel, attitude, air resistance and descent speed change. HOLD near the surface usually sits around hover power while the rocket descends gently. A bar directly above the throttle card shows the suggested slider position. Its white tick is your current throttle; MATCH and a green bar mean within about 4%. While coasting, AIM 100% prepares the slider with the engine OFF. During braking, copy the changing target bar. A short callout above the rocket says Less throttle, Hold throttle or Increase throttle, using the same target as the bar. The larger tilt card and arrow hints stay nearby without covering the rocket or touchdown ring where space permits; very tight screens retain a compact fallback. These are suggestions; the simulator never changes your manual throttle.

The larger tilt card beside the rocket shows small arrow-key hints above its diagrams. Tap those keys briefly to lean or recover upright. Use short taps and release; the tilt display still shows your actual attitude. The orange aim lines on the tilt display show the recommended forward/back and left/right lean. Match the mint nose lines to them; the targets turn green when aligned within 3°. Sideways speed remains available in Flight tools. Hold the centre RCS button (or B on a keyboard) below 1.5 km to brake sideways drift with balanced side thrusters. RCS uses fuel, never changes arrow-key functions, and does not line you up with the pad or slow vertical descent. Release it to stop braking. The button is dimmed outside its operating range. In Easy, automatic RCS is enabled within 100 m above the nearby landing pad or ground on descent when the rocket is nearly upright. A nearby elevated pad uses its deck as the approach reference; a distant high pad does not activate RCS early. It pulses short white bursts from balanced side ports, slows drift and makes small corrections toward a nearby pad. It uses fuel and does not control vertical speed or tilt; a fast descent or distant pad may still be unrecoverable. Holding RCS or B overrides the automatic target correction to brake drift. Turn automatic RCS off in Flight tools if desired. Automatic and manual RCS-assisted flights have separate local records.

The ignition estimate uses changing mass, atmospheric drag and rotating-Earth forces, with a small response allowance. Near a late burn, hold the rocket upright and use full thrust. FUEL TOO LOW and POINT UPRIGHT indicate that braking is not supported by the current forecast. Higher platforms and detailed terrain can change the landing geometry. Ground contact and the depth line currently use simplified pad/sea surfaces.

Your first flights

  1. Start with Easy mode and Practice a landing. The guide manages your descent. For manual practice choose Assisted. You begin 1,200 m above the target, descending at 40 m/s. Ignite promptly; pause to read the current coaching, or open Help. Braking estimates are approximate.
  2. Use Level assist to recover upright, then adjust throttle as descent slows. Reduce thrust before you start climbing again. Aim for a gentle touchdown.
  3. Try a launch with the default nearby target before a long trip. Brief arrow-key inputs tilt the rocket; release them to stop rotating in Assisted mode. The target bearing is a compass direction, not a steering command.

The initial rocket heading faces the route: ↑ tilts toward the destination and → tilts to its right. Toward landing site keeps the rocket close during landing. The small landing navigator shows the selected pad as an orange ring and your rocket as a mint dot. Up follows the launch route, matching the forward/right tilt reference. The line from the mint dot shows five seconds of current ground drift, not a steering command. The map automatically scales to keep the pad and rocket visible. Use the distance and map-width labels to judge your approach. Wide landing view in Flight tools fits both in the 3D view when you want an overview. The thin mint line joins the engine deck to the simplified ground directly below. Temporary camera drags return to your selected framing and zoom. The selected pad remains the destination if guidance reports LAND NEARBY. A site beyond Earth’s horizon can still be occluded. Use Landing pad view for a view from the destination. Earth can hide sites beyond the horizon. Rocket Chase follows the rocket orientation. Severe low-altitude attitudes may require the camera to lift for clearance. The brief mint arrows around the rocket show the nose tilt commanded while a key is held, not sideways thrust or its actual travel direction. In Globe, Landing or a manually adjusted Chase, their direction changes with the view. The Launch tilt display beside the rocket shows tilt from local upright, in the starting forward/right frame. After tilting, engine thrust follows the rocket’s nose; momentum continues until you brake. Roll changes the geographic direction of pitch and yaw. The impact marker estimates an engine-off flight, not an autopilot route.

Assisted mode damps rotation after you release a control. Insane mode retains angular motion. Optional Level assist points the rocket upright and consumes reaction-control fuel. Assisted and Insane do not land for you. Easy adds explicit route and power guidance.

The rocket and performance are fictional. Ground contact currently uses simplified surfaces. Ballistic guidance is approximate and assumes no engine thrust. This is an early build, not an aerospace training tool.